中文
含义
洗衣机在设定时间内未能完成进水，水位未达到预设高度。
常见原因
- 水龙头未打开或水压过低
- 进水阀过滤网堵塞
- 进水管弯折或压扁
- 进水阀线圈损坏
- 水位传感器或压力开关故障
自助排查
- 检查水龙头是否完全打开确认家中水压正常
- 关闭水龙头拧下进水管清理进水阀过滤网
- 检查进水管有无弯折压扁确保管路通畅
- 运行短程序观察进水情况若仍不进水联系售后
English
Meaning
The washer failed to complete water intake within the allotted time.
Common Causes
- Water tap not fully open or water pressure too low
- Inlet valve filter screen clogged
- Inlet hose kinked or crushed
- Inlet valve solenoid damaged
- Water level sensor or pressure switch faulty
Self-Check Steps
- Check water tap is fully open and verify water pressure
- Turn off tap disconnect inlet hose clean inlet valve filter
- Inspect inlet hose for kinks or crushing
- Run a short cycle to observe water intake; contact after-sales if still no water