中文
含义
洗衣机主控制板检测到内部异常电子控制系统故障。
常见原因
- 电源电压波动或浪涌导致控制板元件击穿
- 控制板焊接点老化虚焊或线路腐蚀
- EEPROM或Flash存储器数据损坏
- 晶振或时钟电路异常导致单片机无法正常工作
- 控制板受潮或进水导致线路短路
自助排查
- 断电5-10分钟后重新上电观察是否恢复
- 检查洗衣机插座电压是否稳定（使用其他电器验证）
- 检查控制板区域是否有进水痕迹或烧焦气味
- 控制板故障一般无法自助修复建议联系售后更换主板
English
Meaning
The washer main control board has detected an internal abnormality; electronic control system fault.
Common Causes
- Power voltage fluctuation or surge causing component damage
- Control board solder joints aged or corroded
- EEPROM or Flash memory data corruption
- Crystal oscillator or clock circuit abnormal MCU cannot function
- Control board moisture ingress or water damage causing short circuit
Self-Check Steps
- Unplug for 5-10 minutes reconnect power and observe if fault clears
- Check if wall outlet voltage is stable (verify with another appliance)
- Check control board area for water ingress traces or burnt smell
- Control board faults generally cannot be self-repaired; contact after-sales for board replacement