E1 High

E1 - liebherr Freezer

中文

含义

冷柜NTC温度传感器信号异常,系统自动停机保护。

常见原因

  1. 冷柜传感器开路或短路
  2. 传感器受潮导致阻值漂移
  3. 传感器线束插头腐蚀
  4. 控制板温度检测通道故障

自助排查

  1. 断开电源找到冷柜传感器位置
  2. 检查插头是否受潮氧化
  3. 用万用表测量传感器阻值
  4. 阻值异常需更换同型号传感器
  5. 如传感器正常则检修控制板

English

Meaning

Freezer NTC temperature sensor signal abnormal, system auto-stops for protection.

Common Causes

  1. Freezer sensor open or short circuit
  2. Sensor damp causing resistance drift
  3. Sensor connector corroded
  4. Control board temperature detection channel fault

Self-Check Steps

  1. Disconnect power and locate the freezer sensor
  2. Check connector for moisture and oxidation
  3. Measure sensor resistance with multimeter
  4. Replace sensor if resistance is abnormal
  5. If sensor is normal, service the control board

More liebherr Freezer Error Codes