中文
含义
洗衣机底部检测到漏水，底部托盘浮子开关或漏水传感器被触发。
常见原因
- 进水管或内部水管接头松动老化龟裂导致渗漏
- 外筒密封圈破损或筒体焊缝开裂
- 排水泵密封件老化漏水
- 洗涤剂盒或溢流管堵塞导致泡沫水溢出
- 门封圈破损或安装不到位
自助排查
- 立即拔掉电源插头关闭水龙头
- 清理地面水渍倾斜洗衣机检查底部是否有漏水痕迹
- 检查进水管两端连接是否紧固水管有无龟裂
- 检查门封圈是否有破损异物或霉斑
- 此故障涉及内部管路或密封件建议联系售后上门检修
English
Meaning
Water leakage detected in the washer base; the float switch or leak sensor in the base tray has been triggered.
Common Causes
- Inlet or internal hose connections loose aged or cracked
- Outer tub seal damaged or tub weld seam cracked
- Drain pump seal aged and leaking
- Detergent drawer or overflow pipe clogged causing foam/water overflow
- Door gasket damaged or not seated properly
Self-Check Steps
- Immediately unplug and turn off water tap
- Clean up water tilt washer to check for leak traces underneath
- Check both ends of inlet hose are tight and hose is not cracked
- Inspect door gasket for tears foreign objects or mold
- This fault involves internal plumbing or seals; contact after-sales for on-site inspection