中文
含义
洗衣机不进水或进水缓慢，水位在规定时间内未达到检测值。
常见原因
进水阀线圈故障或滤网堵塞、水龙头未打开或水压过低、水位传感器/管路漏气、进水阀线束脱落。
自助排查
- 确认水龙头已完全打开且供水正常。2. 清洁进水阀滤网。3. 检查进水阀线束连接器。4. 用万用表测量进水阀线圈电阻（约1-5kΩ），异常则更换。
English
Meaning
Water does not enter the washer or fills too slowly — level not reached within the expected time.
Common Causes
Faulty water inlet valve coil or clogged inlet screen, water supply shut off or low pressure, air leak in pressure hose/sensor, or disconnected valve harness.
Self-Check Steps
- Verify faucet is fully open and water supply is adequate. 2. Clean inlet valve screens. 3. Inspect valve harness connector. 4. Measure inlet valve coil resistance (1-5kΩ); replace if out of spec.