中文
含义
FE 表示溢水故障，洗碗机检测到水位异常过高，已启动溢水保护。
常见原因
- 进水阀卡在开启位置，水不断流入。
- 水位开关或压力传感器损坏。
- 控制板进水阀驱动电路短路。
- 排水泵未运作，水积聚。
自助排查
- 立即关闭自来水龙头，拔掉电源插头。
- 这是严重故障，有可能导致水滪。
- 请联系LG售后立即检查更换进水阀。
English
Meaning
FE indicates an overflow condition. The dishwasher has detected excess water and activated the overflow protection.
Common Causes
- Water inlet valve stuck open, causing continuous water flow.
- Water level switch or pressure sensor failed.
- Control board inlet valve drive circuit shorted.
- Drain pump not operating, causing water to build up.
Self-Check Steps
- Immediately turn off the water supply tap and unplug the dishwasher.
- This is a critical fault that may cause flooding.
- Contact LG service immediately for inspection and replacement of the inlet valve.