中文
含义
洗衣机在设定时间内未能完成进水，水位未达到预设高度。
常见原因
- 水龙头未打开或水压过低
- 进水阀过滤网堵塞
- 进水管弯折或压扁
- 进水阀线圈损坏
- 水位传感器或压力开关故障
自助排查
- 检查水龙头是否完全打开确认家中水压正常
- 关闭水龙头拧下进水管清理进水阀过滤网
- 检查进水管有无弯折压扁
- 测量进水阀线圈电阻是否正常
- 运行短程序测试进水情况
English
Meaning
The washer failed to fill water within the allotted time; water level did not reach the preset height.
Common Causes
- Water tap not fully open or water pressure too low
- Inlet valve filter screen clogged
- Inlet hose kinked or crushed
- Inlet valve solenoid damaged
- Water level sensor or pressure switch faulty
Self-Check Steps
- Check water tap fully open and water pressure normal
- Turn off tap disconnect hose clean inlet valve filter
- Inspect inlet hose for kinks or crushing
- Measure inlet valve coil resistance
- Run short cycle to test water intake