E02 - 戴森 吸尘器

中文

含义

吸尘器检测到气流路径中有堵塞物，导致吸力大幅下降或完全丧失。

常见原因

1. 吸头或刷条被地毯长纤维、毛发等缠绕堵塞
2. 延长管或弯管段卡入大块硬物（如玩具、硬币、坚果壳）
3. 集尘桶与旋风分离器连接处的密封圈变形或安装不到位
4. 气口或排气格栅被大颗粒灰尘完全糊住
5. 在吸潮湿地毯后，灰尘结块堵塞管道

自助排查

1. 取下吸头、延长管、集尘桶，分段检查各段是否有明显堵塞物
2. 使用长柄刷或细棍从两端疏通管道，取出异物
3. 清理集尘桶内的旋风分离器锥体，用湿布擦除锥体表面附着物
4. 检查所有密封圈和接口是否安装到位且无破损
5. 将所有部件重新安装到位，确保锁紧到位后开机测试

English

Meaning

The vacuum has detected a blockage in the airflow path, causing significantly reduced or complete loss of suction power.

Common Causes

1. Brush bar or head tangled with long carpet fibers, hair, or string
2. A large hard object (toy, coin, nutshell) lodged inside the extension wand or curved tube section
3. Deformed or mis-seated seal ring between the dust bin and cyclone assembly
4. Grate or exhaust vent completely clogged with fine dust particles
5. Damp debris compacted inside the tube after vacuuming wet carpet

Self-Check Steps

1. Remove the head, extension wand, and dust bin; inspect each section separately for visible blockages
2. Use a long-handled brush or thin rod to push through the tubes from both ends and dislodge debris
3. Clean the cyclone cones inside the dust bin with a damp cloth to remove surface buildup
4. Verify all seals and joints are properly seated and free of damage
5. Reassemble all parts, ensuring each locking mechanism clicks into place, then power on the unit to test