中文
含义
FE 表示溢水故障。洗衣机检测到水位超过正常限制，已启动溢水保护，启动排水泵尽快排水。
常见原因
- The water inlet valve is faulty and cannot close, causing continuous water flow into the drum.
- The pressure sensor has failed and cannot detect that the set water level has been reached.
- The control board inlet valve drive circuit is shorted.
- The inlet valve diaphragm is worn and cannot seal properly.
自助排查
- 立即关闭进水阀，拔掉电源插头，确保安全。
- 这是严重故障，有可能导致水滥出洗衣机造成水滪。
- 确认排水管未被塮塞，排水泵能正常工作以排除积水。
- 请联系LG售后专业人员检查更换进水阀和/或水位传感器。
English
Meaning
FE indicates an overflow condition. The washing machine has detected an abnormal water level beyond the normal limit and has activated overflow protection.
Common Causes
- 进水阀故障，无法关闭，导致水不断流入。
- 水位传感器失效，无法检测到已达到设定水位。
- 控制板进水阀驱动电路短路。
- 进水阀封圈老化，闭不严密。
Self-Check Steps
- Immediately turn off the water supply valve and unplug the machine for safety.
- This is a critical fault that may cause water to overflow from the washing machine, leading to flooding.
- Ensure the drain hose is not clogged and the drain pump can operate properly to discharge standing water.
- Contact LG service immediately for professional inspection and replacement of the inlet valve and/or pressure sensor.