中文
含义
机器控制板无法与电池组BMS建立通讯，或未检测到电池组的电信号，因此拒绝启动。
常见原因
- 电池组未正确安装到位，锁扣未完全卡入
- 电池触针或机器触点氧化、脏污导致电气接触不良
- 电池组BMS电路板损坏或进水腐蚀
- 电池与机器之间的通讯线路（数据针脚）断裂
- 非兼容电池组或第三方改装电池，通讯协议不匹配
自助排查
- 取下电池组重新安装，确保听到锁扣”咔嗒”声
- 用干布或橡皮擦拭电池触针和机器触点，去除氧化层
- 检查电池触点有无变形、断裂或腐蚀痕迹
- 如果有其他同型号兼容电池，替换测试以区分是电池还是机器问题
- 若所有电池均报E06，可能是主机电池接口板损坏，需送修
English
Meaning
The machine’s control board cannot establish communication with the battery pack’s BMS, or detects no electrical signal from the battery, and therefore refuses to start.
Common Causes
- Battery pack not fully seated, latch not clicked into place
- Oxidized or dirty battery contacts and machine terminals preventing electrical connection
- BMS circuit board on the battery pack damaged or corroded from moisture ingress
- Broken communication line (data pin) between battery and machine
- Incompatible or third-party modified battery with mismatched communication protocol
Self-Check Steps
- Remove and reinstall the battery pack, ensuring you hear the latch click into position
- Wipe the battery contact pins and machine terminals with a dry cloth or rubber eraser to remove oxidation
- Inspect battery contacts for bending, breakage, or signs of corrosion
- If a compatible spare battery is available, swap to determine whether the fault lies with the battery or the machine
- If every battery triggers E06, the main unit battery interface board may be faulty and requires service