E2

E2 - 飞利浦 扫地机

中文

含义

边刷堵塞或卡死。扫地机器人侧边的边缘清扫刷无法正常旋转。

常见原因

  1. 边刷被电线、绳线或较长纤维缠绕
  2. 边刷安装螺丝松动导致刷头下垂卡住
  3. 边刷本身变形或磨损导致与底盘摩擦
  4. 边刷电机轴被纤维缠死
  5. 边刷插拔接口松动导致接触不良

自助排查

  1. 拧下边刷固定螺丝,取下边刷清理缠绕物
  2. 检查边刷是否变形或磨损严重——更换已变形的边刷
  3. 清洁边刷电机轴并用镊子去除缠绕的纤维
  4. 重新安装边刷,确认螺丝拧紧
  5. 如电机轴完全无法转动,需要更换边刷电机

English

Meaning

Side brush jam. The edge-sweeping brush on the side of the robot cannot rotate normally.

Common Causes

  1. Side brush tangled with power cords, string, or long fibers
  2. Loose mounting screw causing the side brush to droop and drag on the floor
  3. Deformed or worn side brush scraping against the chassis
  4. The side brush motor shaft bound up with wrapped fibers
  5. Loose plug-and-socket connection on the side brush motor

Self-Check Steps

  1. Remove the side brush screw, detach the brush, and clear all tangled material
  2. Inspect the brush for deformation or excessive wear — replace if bent
  3. Clean the motor shaft and use tweezers to remove any fiber wrapping
  4. Reinstall the side brush and tighten the screw securely
  5. If the motor shaft is completely seized, replace the side brush motor assembly

更多 飞利浦 扫地机 错误代码