中文
含义
集尘盒异常。机器人检测到集尘盒未安装、安装不到位或已满需要清空。
常见原因
- 集尘盒已满——达到容量上限需要倾倒
- 集尘盒未正确插入到位——传感器未触发
- 集尘盒检测传感器（微动开关或磁簧开关）移位或卡住
- 集尘盒进风口HEPA滤网堵塞导致气流通路受阻
- 集尘盒传感器触点积尘导致接触不良
自助排查
- 取出集尘盒，倒空垃圾并清洁
- 检查HEPA滤网是否堵塞——用软毛刷清洁或更换
- 重新安装集尘盒，确保推入到底发出”咔嗒”声
- 清洁集尘盒传感器触点以及机器内部对应传感器
- 如传感器仍然检测不到，检查微动开关是否卡住
English
Meaning
Dust bin anomaly. The robot detects that the dust bin is missing, not properly installed, or full and requiring emptying.
Common Causes
- Dust bin full — contents have reached the maximum capacity
- Dust bin not fully inserted — the detection sensor has not been triggered
- Misaligned or stuck bin detection sensor (micro-switch or reed switch)
- Clogged HEPA filter on the dust bin intake restricting airflow
- Dust-covered sensor contacts causing poor electrical connection
Self-Check Steps
- Remove the dust bin, empty the contents, and clean the bin
- Check the HEPA filter for clogging — clean with a soft brush or replace
- Reinstall the dust bin, pushing firmly until it clicks into place
- Clean both the sensor contacts on the dust bin and the corresponding sensor in the robot
- If the sensor still fails to detect the bin, check if the micro-switch is stuck