中文
含义
水箱传感器故障。此代码适用于带排水泵或加湿水箱功能的Panasonic空调型号。水箱内的液位传感器信号异常,系统无法准确判断水箱水位状态。
常见原因
- 水箱浮子卡滞在某一位置,无法随水位自由上下
- 液位传感器磁簧开关老化失效
- 水箱内水垢或污物过多,影响传感器动作
- 传感器连接线束插头松动或受潮
- 水箱未正确安装到位
自助排查
- 取出水箱,检查内部浮子是否可以自由活动
- 清洁水箱内部水垢和杂物
- 用手模拟浮子动作,听是否有磁簧开关的”咔嗒”声
- 重新安装水箱,确认其在底座上安装到位
English
Meaning
Tank sensor fault. This code applies to Panasonic AC models with a drain pump or humidifier water tank function. The liquid level sensor inside the tank returns an abnormal signal, and the system cannot accurately determine the water level.
Common Causes
- Tank float stuck in one position, unable to rise and fall freely with the water level
- Aged reed switch in the level sensor
- Excessive limescale or debris in the tank interfering with sensor movement
- Loose or damp sensor wire connector
- Water tank not properly seated in its dock
Self-Check Steps
- Remove the water tank and check the float for free movement
- Clean limescale and debris from inside the tank
- Manually simulate the float motion and listen for the “click” of the reed switch actuation
- Reinstall the tank, ensuring it is fully seated in the base