E1 中

E1 - 老板电器 油烟机

中文

含义

触摸面板故障。主控检测到触摸感应电路异常，按键无响应或误触发，导致无法通过面板控制烟机。

常见原因

  1. 触摸面板进水或受潮导致感应电容异常
  2. 面板表面油污过厚干扰电容感应
  3. 触摸芯片（Touch IC）损坏或虚焊
  4. 面板排线松动或接触不良
  5. 主控板与面板通信中断
  6. 静电干扰导致触摸逻辑紊乱

自助排查

  1. 切断电源3分钟后重新上电，观察是否恢复
  2. 用干布清洁面板表面油污和水分，避免使用腐蚀性清洁剂
  3. 检查排线是否插紧，重新插拔确认接触良好
  4. 若操作时仅部分按键不灵敏，用吹风机冷风档吹干面板内部
  5. 如仍无法解决，需更换触摸面板总成或主控板

English

Meaning

Touch panel failure. The main control detects an abnormal touch sensing circuit — keys are unresponsive or falsely triggered, making hood control via the panel impossible.

Common Causes

  1. Water ingress or moisture on the touch panel altering capacitance
  2. Heavy grease film on the panel surface interfering with capacitive sensing
  3. Damaged or cold-soldered touch IC
  4. Loose or poor contact in the panel ribbon cable
  5. Communication failure between the mainboard and the touch panel
  6. Electrostatic interference causing logic errors

Self-Check Steps

  1. Power off for 3 minutes, then restart to see if normal operation resumes
  2. Wipe the panel surface clean of grease and moisture with a dry cloth — avoid corrosive cleaners
  3. Check the ribbon cable connection; reseat it to ensure proper contact
  4. If only some keys are unresponsive, use a hair dryer on cool setting to dry internal moisture
  5. If the problem persists, replace the touch panel assembly or the main control board

更多 老板电器 油烟机 错误代码

E0 E2 E3 E4 E5 E6