E6 - hisense Washer

中文

含义

E6 为洗涤水温加热故障。洗衣机内置加热管用于提高洗涤水温，加热异常（不加热或加热失控）触发 E6 报警。

常见原因

1. 加热管开路烧断
2. NTC 温度传感器未检测到温升
3. 加热继电器触点粘连或烧毁
4. 加热回路温度保险丝熔断
5. 加热管接线端子烧毁

自助排查

1. 选择常温洗涤模式（不带加热），观察洗衣机是否能正常完成该程序。
2. 如常温洗涤正常但加热洗涤报 E6，说明加热回路有问题。
3. 用万用表测量加热管阻值（通常为数十欧），无穷大说明加热管烧断。
4. 检查加热管接线端子是否有烧焦痕迹。
5. 加热管或温度保险丝更换涉及拆卸外筒，建议联系海信售后处理。

English

Meaning

Wash water heating fault. The washer has a built-in heating element to raise wash water temperature.

Common Causes

1. Heating element open circuit / burned out
2. NTC temperature sensor not detecting temperature rise
3. Heating relay contacts welded or burned
4. Thermal fuse in heating circuit blown
5. Heating element wiring terminal burned

Self-Check Steps

1. Select a cold water wash cycle (no heating) and observe whether the washer completes the program normally.
2. If cold wash works fine but a heated cycle triggers E6, the heating circuit has a problem.
3. Use a multimeter to measure the heating element resistance (typically tens of ohms); infinite indicates burnout.
4. Inspect the heating element wiring terminals for burn marks.
5. Replacing the heating element or thermal fuse requires removing the outer drum; contact Hisense service.