F1 - 海信 洗衣机

中文

含义

F1 为溢水保护触发。洗衣机底部集水槽检测到有水，触发溢水保护开关。此故障意味着洗衣机内部存在漏水，需立即处理以免发生电气安全事故。

常见原因

1. 内筒密封圈（水封）老化泄漏
2. 管路卡箍松动漏水
3. 排水泵壳体开裂
4. 进水阀卡住持续进水
5. 洗涤剂盒溢水

自助排查

1. 立即断开洗衣机电源并关闭水龙头，防止继续进水。
2. 打开洗衣机底部检修盖（如有），检查底部是否有明显积水。
3. 检查进水管和排水管接头是否渗水。
4. 拉出洗涤剂盒，检查是否有堵塞导致溢水。
5. 溢水故障涉及内部管路和密封件，建议不要自行拆机，立即联系海信售后检修。

English

Meaning

Overflow protection triggered by water detected in the base tray. This indicates an internal water leak that must be addressed immediately.

Common Causes

1. Tub seal (water seal) aged and leaking
2. Hose clamp loose causing water leak
3. Drain pump housing cracked
4. Inlet valve stuck open causing continuous water intake
5. Detergent drawer overflow

Self-Check Steps

1. Immediately disconnect the washer power and close the water tap to prevent further water intake.
2. Open the washer bottom service panel (if equipped) and check for standing water.
3. Check the inlet and drain hose connections for water seepage.
4. Pull out the detergent drawer and check for clogs that may cause overflow.
5. Overflow faults involve internal pipes and seals; do not disassemble the machine yourself. Contact Hisense service immediately for inspection and repair.